Sanden Eco Plus 250 Litre

Sanden Eco Plus 250 Litre

Availability: In stock

Sanden Eco Plus 250 Litre (GAUS-250EQTAQ) complete heat pump system 315 litre stainless steel tank 1428mm x 621mm, 15 year warranty, made in Australia


CO2 Heat pump 898mm x 725mm x 362mm, 6 year warranty, made in Japan

* Required Fields

Description

Details

  • Sanden Eco Plus 250 litre complete heat pump system
  • High quality, Australian made extra long life 316 Marine Grade stainless steel cylinder
  • CO2 Heat pump, made in Japan
  • Sanden’s “Eco®” Plus Hot Water Heat Pump technology uses 0.9kW of energy to generate 5.0kW of heat; this is 80 per cent less energy compared to traditional hot water systems.
  • An environmentally advanced product that is affordable. It employs superior R744 (CO2) refrigerant technology, so that the amount of electrical energy required to heat the water is significantly less than that required by a conventional electric storage hot water system
  • A high Coefficient of Performance (COP 5^) results in significantly reduced energy use and CO2 emissions.
  • Whisper quiet operation, with industry leading noise level of 37dB - very neighbour friendly!
     

 

Specification

Specifications

Tank

  • Height: 1428 mm
  • Hotwater outlet and PTR Valve: 1212 mm
  • Sensor Port: 708 mm
  • Cold water inlet / heat pump flow: 222 mm
  • Diameter 621 mm
  • Weight 45 kg
  • Storage Capacity 250L

 

Heat Pump

  • Weight: 48 kl
  • Power Input: 0.9 kW
  • COP (Heating Efficiency): 5.0^
  • Refrigerant: CO2 (R744)
  • Water Temperature Setting: 60 °C
  • Compressor: Variable
  • Electrical Supply: 220 – 240V/50Hz/1Ph
  • Circuit: 20 Amps
  • Operating Noise Level: 37 dB
  • Ambient Air Operating Temperature: -10 ºC to +43 ºC
How It Work

How It Works

The Sanden "Eco®" Plus Hot Water Heat Pump System works in a different way compared to a conventional electric hot water system. The Sanden "Eco®" Hot Water Heat Pump System operates like a refrigerator in reverse. It contains a fan that forces air through an evaporator that contains a refrigerant. The heat in the air passes through the evaporator and is absorbed by a natural refrigerant, R744 (CO2), which is ozone friendly and does not contribute to global warming.

The warm gaseous refrigerant is circulated in the system via a compressor. As it passes through the compressor, its pressure rises, as does its temperature. This hot refrigerant then passes through a heat exchanger to heat the water, which is finally pumped to the storage tank.

Rebate

Redate

Eligible for STCs (small-scale technology certificates) & VEECs rebates  in all zones. Check our rebate calculator to find out more.